Skip to content

WarpCombustor

Repository source: WarpCombustor


Description

This example demonstrates how to extract "computational planes" from a structured dataset. Structured data has a natural, logical coordinate system based on i-j-k indices. Specifying imin,imax, jmin,jmax, kmin,kmax pairs can indicate a point, line, plane, or volume of data.

In this example, we extract three planes and warp them using scalar values in the direction of the local normal at each point. This gives a sort of "velocity profile" that indicates the nature of the flow.

Other languages

See (Python), (PythonicAPI)

Question

If you have a question about this example, please use the VTK Discourse Forum

Code

WarpCombustor.cxx

#include <vtkActor.h>
#include <vtkAppendPolyData.h>
#include <vtkCamera.h>
#include <vtkMultiBlockDataSet.h>
#include <vtkMultiBlockPLOT3DReader.h>
#include <vtkNamedColors.h>
#include <vtkNew.h>
#include <vtkPolyDataMapper.h>
#include <vtkPolyDataNormals.h>
#include <vtkProperty.h>
#include <vtkRenderWindow.h>
#include <vtkRenderWindowInteractor.h>
#include <vtkRenderer.h>
#include <vtkStructuredGrid.h>
#include <vtkStructuredGridGeometryFilter.h>
#include <vtkStructuredGridOutlineFilter.h>
#include <vtkWarpScalar.h>

#include <iostream>
#include <string>

// This example demonstrates how to extract "computational planes" from a
// structured dataset. Structured data has a natural, logical coordinate
// system based on i-j-k indices. Specifying imin,imax, jmin,jmax, kmin,kmax
// pairs can indicate a point, line, plane, or volume of data.
//
// In this example, we extract three planes and warp them using scalar values
// in the direction of the local normal at each point. This gives a sort of
// "velocity profile" that indicates the nature of the flow.

int main(int argc, char* argv[])
{
  if (argc < 3)
  {
    std::cout << "Usage: " << argv[0] << " combxyz.bin combq.bin" << std::endl;
    return EXIT_FAILURE;
  }
  // Here we read data from a annular combustor. A combustor burns fuel and air
  // in a gas turbine (e.g., a jet engine) and the hot gas eventually makes its
  // way to the turbine section.
  //
  vtkNew<vtkMultiBlockPLOT3DReader> pl3d;
  pl3d->SetXYZFileName(argv[1]);
  pl3d->SetQFileName(argv[2]);
  pl3d->SetScalarFunctionNumber(100);
  pl3d->SetVectorFunctionNumber(202);
  pl3d->Update();

  vtkStructuredGrid* pl3dOutput =
      dynamic_cast<vtkStructuredGrid*>(pl3d->GetOutput()->GetBlock(0));

  // Planes are specified using a imin,imax, jmin,jmax, kmin,kmax coordinate
  // specification. Min and max i,j,k values are clamped to 0 and maximum value.
  //
  vtkNew<vtkStructuredGridGeometryFilter> plane;
  plane->SetInputData(pl3dOutput);
  plane->SetExtent(10, 10, 1, 100, 1, 100);

  vtkNew<vtkStructuredGridGeometryFilter> plane2;
  plane2->SetInputData(pl3dOutput);
  plane2->SetExtent(30, 30, 1, 100, 1, 100);
  vtkNew<vtkStructuredGridGeometryFilter> plane3;
  plane3->SetInputData(pl3dOutput);
  plane3->SetExtent(45, 45, 1, 100, 1, 100);

  // We use an append filter because that way we can do the warping, etc. just
  // using a single pipeline and actor.
  //
  vtkNew<vtkAppendPolyData> appendF;
  appendF->AddInputConnection(plane->GetOutputPort());
  appendF->AddInputConnection(plane2->GetOutputPort());
  appendF->AddInputConnection(plane3->GetOutputPort());

  vtkNew<vtkWarpScalar> warp;
  warp->SetInputConnection(appendF->GetOutputPort());
  warp->UseNormalOn();
  warp->SetNormal(1.0, 0.0, 0.0);
  warp->SetScaleFactor(2.5);

  vtkNew<vtkPolyDataNormals> normals;
  normals->SetInputConnection(warp->GetOutputPort());
  normals->SetFeatureAngle(60);

  vtkNew<vtkPolyDataMapper> planeMapper;
  planeMapper->SetInputConnection(normals->GetOutputPort());
  planeMapper->SetScalarRange(pl3dOutput->GetScalarRange());

  vtkNew<vtkActor> planeActor;
  planeActor->SetMapper(planeMapper);

  // The outline provides context for the data and the planes.
  vtkNew<vtkStructuredGridOutlineFilter> outline;
  outline->SetInputData(pl3dOutput);

  vtkNew<vtkPolyDataMapper> outlineMapper;
  outlineMapper->SetInputConnection(outline->GetOutputPort());

  vtkNew<vtkNamedColors> colors;

  vtkNew<vtkActor> outlineActor;
  outlineActor->SetMapper(outlineMapper);
  outlineActor->GetProperty()->SetColor(colors->GetColor3d("Black").GetData());

  // Create the usual graphics stuff.
  //
  vtkNew<vtkRenderer> ren1;
  vtkNew<vtkRenderWindow> renWin;
  renWin->AddRenderer(ren1);

  vtkNew<vtkRenderWindowInteractor> iren;
  iren->SetRenderWindow(renWin);

  ren1->AddActor(outlineActor);
  ren1->AddActor(planeActor);
  ren1->SetBackground(colors->GetColor3d("Silver").GetData());

  renWin->SetSize(640, 480);
  renWin->SetWindowName("WarpCombustor");

  // Create an initial view.
  ren1->GetActiveCamera()->SetClippingRange(3.95297, 50);
  ren1->GetActiveCamera()->SetFocalPoint(8.88908, 0.595038, 29.3342);
  ren1->GetActiveCamera()->SetPosition(-12.3332, 31.7479, 41.2387);
  ren1->GetActiveCamera()->SetViewUp(0.060772, -0.319905, 0.945498);
  iren->Initialize();

  // Render the image.
  //
  renWin->Render();
  iren->Start();
  return EXIT_SUCCESS;
}

CMakeLists.txt

cmake_minimum_required(VERSION 3.12 FATAL_ERROR)

project(WarpCombustor)

find_package(VTK COMPONENTS 
  CommonColor
  CommonCore
  CommonDataModel
  FiltersCore
  FiltersGeneral
  FiltersGeometry
  IOParallel
  InteractionStyle
  RenderingContextOpenGL2
  RenderingCore
  RenderingFreeType
  RenderingGL2PSOpenGL2
  RenderingOpenGL2
)

if (NOT VTK_FOUND)
  message(FATAL_ERROR "WarpCombustor: Unable to find the VTK build folder.")
endif()

# Prevent a "command line is too long" failure in Windows.
set(CMAKE_NINJA_FORCE_RESPONSE_FILE "ON" CACHE BOOL "Force Ninja to use response files.")
add_executable(WarpCombustor MACOSX_BUNDLE WarpCombustor.cxx )
  target_link_libraries(WarpCombustor PRIVATE ${VTK_LIBRARIES}
)
# vtk_module_autoinit is needed
vtk_module_autoinit(
  TARGETS WarpCombustor
  MODULES ${VTK_LIBRARIES}
)

Download and Build WarpCombustor

Click here to download WarpCombustor and its CMakeLists.txt file. Once the tarball WarpCombustor.tar has been downloaded and extracted,

cd WarpCombustor/build

If VTK is installed:

cmake ..

If VTK is not installed but compiled on your system, you will need to specify the path to your VTK build:

cmake -DVTK_DIR:PATH=/home/me/vtk_build ..

Build the project:

make

and run it:

./WarpCombustor

WINDOWS USERS

Be sure to add the VTK bin directory to your path. This will resolve the VTK dll's at run time.